Welcome to our website.

Texas Instruments SN74AVC4T234ZSUR Translation – Voltage Levels 4B Dual-Supply Bus Xcvr

Short Description:

Part No SN74AVC4T234ZSUR
Manufacturer Texas Instruments
Product Category Translation – Voltage Levels
Propagation Delay Time 3.6 ns 
Mounting Style SMD/SMT 
Package / Case  UCSP-11
Stock : 0

Product Detail

Product Tags

Shopping Process
Product Technical Specifications
Part No SN74AVC4T234ZSUR
Manufacturer  Texas Instruments
Product Category  Translation - Voltage Levels
Propagation Delay Time  3.6 ns
Supply Voltage - Max  3.6 V
Supply Voltage - Min  0.9 V
Minimum Operating Temperature  - 40 C
Maximum Operating Temperature  + 85 C
Mounting Style  SMD/SMT
Package / Case  UCSP-11
Series  SN74AVC4T234
Packaging  Reel
Packaging  Cut Tape
Packaging  MouseReel
Brand  Texas Instruments
Data Rate  380 Mb/s
Development Kit  SN74AVC4T234EVM
Features  Partial power down (Ioff), Over-voltage tolerant inputs, Input-disable
High Level Output Current  12 mA
Logic Family  74AVC
Logic Type  Non-inverting
Low Level Output Current  12 mA
Moisture Sensitive  Yes
Operating Temperature Range  - 40 C to + 85 C
Product Type  Translation - Voltage Levels
Factory Pack Quantity  2500pcs
Subcategory  Logic ICs
Unit Weight  0.006173 oz
Wide operating VCC range of 0.9 V to 3.6 V 3.6-V I/O Tolerant to support mixed-mode signal operation Max tpd of 3.7 ns at 3.3 V Balanced propagation delays: tPLH = tPHL Low static-power consumption, 5-μA Max ICC Outputs disabled if either VCC goes to 0V ±3-mA Output drive at 1.8 V 26-Ω series resistor on A-side outputs Ioff supports partial power-down-mode operation Input hysteresis allows slow input transition and better switching noise immunity at input Maximum data rates – 380 Mbps (1.8-V to 3.3-V translation) – 200 Mbps (<1.8-V to 3.3-V translation) – 200 Mbps (translate to 2.5 V or 1.8 V) – 150 Mbps (translate to 1.5 V) – 100 Mbps (translate to 1.2 V) Latch-up performance exceeds 100 mA Per JESD 78, Class II ESD protection exceeds JESD 22 – 2000-V human-body model (A114-A) – 500-V charged-device model (C101)
Personal electronics Industrial Enterprise Telecom Description This 4-bit non-inverting bus transceiver uses two separate configurable power-supply rails to enable asynchronous communication between B-port inputs and A-port outputs. The A port is designed to track VCCA while the B port is designed to track VCCB. Both VCCA and VCCB are configurable from 0.9 V to 3.6 V. The SN74AVC4T234 solution offers the industry's low-power needs in battery-powered portable applications by ensuring both a very low static and dynamic power consumption across the entire VCC range of 0.9 V to 3.6 V, resulting in an increased battery life. This product also maintains excellent signal integrity. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current back flow through the device when it is powered down. The VCC isolation feature ensures that if either VCC input is at GND, then A-side ports are in the high impedance state.

  • Previous:
  • Next:

  • Write your message here and send it to us